Time Road Marking Paint

A high quality fast drying road marking paint based on styrenated alkyd and chlorinated rubber. specially developed to be applied on asphalt and concrete surfaces.

Recommended Use :

Recommended to use as a road marking paint, for runways, parking lots and pavements on asphalt and concrete surfaces. It can be used with or without glass beads.

Color

Size

Price

Tax Inclusive

415

Quantity

...

Paint Calculator

استخدم حاسبة الدهان لحساب كمية الدهان المطلوبة لمساحة معينة

طريقة الحساب هي انه يتم حساب مجموع الأمتار المربعة المراد طلائها وقسمتها على معدل التغطية لكل لتر للمنتج المراد طلاءه ثم تضرب النتيجة في عدد الطبقات المطلوبة.

Start The Calculator

Quick Method

By Space (m2)

Advanced Method

Accurate Dimensions

Doors

- +

Windows

- +

Reset Form

Add Space

Added Spaces :

No areas have been added yet,
kindly add spaces in order to calculate the required paint.

Required Coats

Total Area (m2)

Recommended Quantity

Recommended Quantities :

No areas have been added yet,
kindly add spaces in order to calculate the recommended qunatities.

Application Guide

Prepare the surface by cleaning it appropriately.
Stir the paint well before use until it becomes homogeneous.
Apply a layer of "تايم رود ماركينج".
The paint must be stirred well until it becomes homogeneous before use.
Dilute to the necessary degree of viscosity using “Thinner 505” diluent to obtain the appropriate viscosity for the application.
Dust, oil, grease and other contaminants on the surface must be removed.
Do not paint over wet surfaces until they are completely dry. In the case of concrete surfaces or asphalt surfaces that are not treated with sufficient pressure, there may be a risk of some cracks or peeling from the edges of the paint layer.
Do not paint the next layer unless the previous layer is completely dry. A sufficient period of time must be given between the two layers, not less than the minimum time between coating the two layers.
The temperature of the surface to be painted must not be less than 15°C, and the ambient relative humidity must not exceed 60%.
To obtain a good reflection of light, an amount of glass beads can be sprinkled over the wet paint surface immediately after painting.

Containers And Coverage

The theoretical diffusion rate is 2.2 m2 per liter , at a dry layer thickness of 190 microns

18L Can

Coverage : 39.6 m2

3.65L Gallon

Coverage : 8.03 m2

* Paint coverage depends on various factors like surface type, application method, and tools used. The coverage distance is based on one coat of paint on white color.